Auto-Generated Summary
> Provide an extensive
summary of the agreements by topic. No need to mention CRs.
Summary of Agreements by Topic
UE Complexity Reduction
- Peak Data Rate Target:
- The peak rate target for Rel-18 eRedCap UEs is set at 10
Mbps, regardless of optional features supported.
- For peak data rate reduction:
- With UE BB bandwidth reduction: vLayers·Qm·f = 3.2.
- Without UE BB bandwidth reduction: vLayers·Qm·f =
0.75 (assuming 20 MHz bandwidth in the 38.306 peak rate expression).
- Bandwidth Reduction:
- Maximum PRBs:
- For PUSCH: 25 PRBs for 15 kHz SCS and 12 PRBs
for 30 kHz SCS.
- For PDSCH (unicast and broadcast): Same limits as PUSCH.
- Scheduling of Channels:
- SIB1, OSI, paging, and RAR PDSCH can be scheduled larger
than 5 MHz and up to the maximum PRBs allowed.
- Multicast/Broadcast:
- For multicast MBS specified in Rel-17, the number of
PRBs scheduled in DCI is not larger than 25 PRBs for 15 kHz SCS
or 12 PRBs for 30 kHz SCS.
- Simultaneous Reception:
- For FDMed unicast and multicast/broadcast PDSCH:
- The UE can decode two PDSCHs partially or fully
overlapping in time in non-overlapping PRBs if the total PRBs allocated
are within the maximum limits.
- If the total PRBs exceed the maximum, the UE may skip
decoding one of the PDSCHs.
- Relaxed Timelines:
- Timeline relaxations apply for:
- Msg2-Msg3: 1 slot for Msg2 PDSCH larger than the
maximum PRBs.
- 2-step RACH:
- Between reception of fallbackRAR/successRAR and Msg3
transmission.
- Between reception of MsgB PDSCH and PRACH transmission.
- Early Indication:
- Rel-18 eRedCap UEs share MsgA PRACH configured for Rel-17
RedCap UEs if performing 2-step RACH.
- Additional early indication in MsgA PRACH is not
supported.
Multicast/Broadcast Handling
- Simultaneous Reception:
- An eRedCap UE can decode simultaneous MBS multicast and
unicast PDSCHs if the total PRBs do not exceed the maximum limits.
- For simultaneous MBS broadcast and unicast when PRBs
exceed the maximum, further discussion is required.
- MCCH and PBCH:
- The UE is expected to decode PDSCH scheduled with
MCCH-RNTI and PBCH in PCell that partially or fully overlap in time in
non-overlapping PRBs.
Random Access
- Msg3 PUSCH:
- A UE does not expect to transmit a PUSCH over a bandwidth
larger than the maximum PRBs per hop in a slot for:
- RAR UL grant.
- DCI scrambled by TC-RNTI.
- Type-2 random access procedure.
- FallbackRAR and MsgB:
- For MsgB PDSCH scheduled by MSGB-RNTI:
- If the UE does not correctly receive the transport block
or RAPID, it shall be ready to transmit PRACH within specified
timelines.
Optional Features
- Rel-18 eRedCap UEs:
- Optional features include:
- 2 Rx branches with DL MIMO.
- DL 256QAM.
Specification Clarifications
- Handling of Multiple PDSCHs:
- During P-RNTI triggered SI acquisition, if the total PRBs
exceed the maximum, the UE may skip decoding PDSCH scheduled with
C-RNTI/MCS-C-RNTI/CS-RNTI.
- FG 48-2 UEs:
- RAR PDSCH timeline relaxation does not apply to FG 48-2
UEs for CFRA.
- Specification Updates:
- Clarifications on "A UE that has not indicated FG
48-2" and "A UE that indicated FG 48-2" are under
discussion.
Higher Layer Signaling
- Peak Rate Parameters:
- Rel-18 eRedCap UEs signal peak data rate-related
parameters corresponding to vLayers, Qm, and f.
- No new values for these parameters will be introduced.
LS to RAN2
- Inform RAN2:
- Agreements on MsgA PRACH sharing and peak rate-related
capability parameters were communicated to RAN2.
This summary captures the key agreements and decisions made
across sessions regarding Rel-18 eRedCap UE complexity reduction and related
topics.